Struct bevy::utils::tracing::level_filters::LevelFilter

pub struct LevelFilter(/* private fields */);
Expand description

A filter comparable to a verbosity Level.

If a Level is considered less than a LevelFilter, it should be considered enabled; if greater than or equal to the LevelFilter, that level is disabled. See LevelFilter::current for more details.

Note that this is essentially identical to the Level type, but with the addition of an OFF level that completely disables all trace instrumentation.

See the documentation for the Level type to see how Levels and LevelFilters interact.

Implementations§

§

impl LevelFilter

pub const OFF: LevelFilter = _

The “off” level.

Designates that trace instrumentation should be completely disabled.

pub const ERROR: LevelFilter = _

The “error” level.

Designates very serious errors.

pub const WARN: LevelFilter = _

The “warn” level.

Designates hazardous situations.

pub const INFO: LevelFilter = _

The “info” level.

Designates useful information.

pub const DEBUG: LevelFilter = _

The “debug” level.

Designates lower priority information.

pub const TRACE: LevelFilter = _

The “trace” level.

Designates very low priority, often extremely verbose, information.

pub const fn from_level(level: Level) -> LevelFilter

Returns a LevelFilter that enables spans and events with verbosity up to and including level.

pub const fn into_level(self) -> Option<Level>

Returns the most verbose Level that this filter accepts, or None if it is OFF.

pub fn current() -> LevelFilter

Returns a LevelFilter that matches the most verbose Level that any currently active Subscriber will enable.

User code should treat this as a hint. If a given span or event has a level higher than the returned LevelFilter, it will not be enabled. However, if the level is less than or equal to this value, the span or event is not guaranteed to be enabled; the subscriber will still filter each callsite individually.

Therefore, comparing a given span or event’s level to the returned LevelFilter can be used for determining if something is disabled, but should not be used for determining if something is enabled.

Trait Implementations§

§

impl AsLog for LevelFilter

§

type Log = LevelFilter

The log type that this type can be converted into.
§

fn as_log(&self) -> <LevelFilter as AsLog>::Log

Returns the log equivalent of self.
§

impl Clone for LevelFilter

§

fn clone(&self) -> LevelFilter

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Debug for LevelFilter

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl Display for LevelFilter

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl<S> Filter<S> for LevelFilter

Available on crate feature registry only.
§

fn enabled(&self, meta: &Metadata<'_>, _: &Context<'_, S>) -> bool

Returns true if this layer is interested in a span or event with the given Metadata in the current Context, similarly to Subscriber::enabled. Read more
§

fn callsite_enabled(&self, meta: &'static Metadata<'static>) -> Interest

Returns an Interest indicating whether this layer will always, sometimes, or never be interested in the given Metadata. Read more
§

fn max_level_hint(&self) -> Option<LevelFilter>

Returns an optional hint of the highest verbosity level that this Filter will enable. Read more
§

fn event_enabled(&self, event: &Event<'_>, cx: &Context<'_, S>) -> bool

Called before the filtered [Layer]'s [on_event], to determine if on_event` should be called. Read more
§

fn on_new_span(&self, attrs: &Attributes<'_>, id: &Id, ctx: Context<'_, S>)

Notifies this filter that a new span was constructed with the given Attributes and Id. Read more
§

fn on_record(&self, id: &Id, values: &Record<'_>, ctx: Context<'_, S>)

Notifies this filter that a span with the given Id recorded the given values. Read more
§

fn on_enter(&self, id: &Id, ctx: Context<'_, S>)

Notifies this filter that a span with the given ID was entered. Read more
§

fn on_exit(&self, id: &Id, ctx: Context<'_, S>)

Notifies this filter that a span with the given ID was exited. Read more
§

fn on_close(&self, id: Id, ctx: Context<'_, S>)

Notifies this filter that a span with the given ID has been closed. Read more
§

impl From<Level> for LevelFilter

§

fn from(level: Level) -> LevelFilter

Converts to this type from the input type.
§

impl From<LevelFilter> for Directive

§

fn from(level: LevelFilter) -> Directive

Converts to this type from the input type.
§

impl From<LevelFilter> for Option<Level>

§

fn from(filter: LevelFilter) -> Option<Level>

Converts to this type from the input type.
§

impl From<Option<Level>> for LevelFilter

§

fn from(level: Option<Level>) -> LevelFilter

Converts to this type from the input type.
§

impl FromStr for LevelFilter

§

type Err = ParseLevelFilterError

The associated error which can be returned from parsing.
§

fn from_str(from: &str) -> Result<LevelFilter, <LevelFilter as FromStr>::Err>

Parses a string s to return a value of this type. Read more
§

impl Hash for LevelFilter

§

fn hash<__H>(&self, state: &mut __H)
where __H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
§

impl<S> Layer<S> for LevelFilter
where S: Subscriber,

§

fn register_callsite(&self, metadata: &'static Metadata<'static>) -> Interest

Registers a new callsite with this layer, returning whether or not the layer is interested in being notified about the callsite, similarly to Subscriber::register_callsite. Read more
§

fn enabled(&self, metadata: &Metadata<'_>, _: Context<'_, S>) -> bool

Returns true if this layer is interested in a span or event with the given metadata in the current Context, similarly to Subscriber::enabled. Read more
§

fn on_register_dispatch(&self, subscriber: &Dispatch)

Performs late initialization when installing this layer as a Subscriber. Read more
§

fn on_layer(&mut self, subscriber: &mut S)

Performs late initialization when attaching a Layer to a Subscriber. Read more
§

fn on_new_span(&self, attrs: &Attributes<'_>, id: &Id, ctx: Context<'_, S>)

Notifies this layer that a new span was constructed with the given Attributes and Id.
§

fn on_record(&self, _span: &Id, _values: &Record<'_>, _ctx: Context<'_, S>)

Notifies this layer that a span with the given Id recorded the given values.
§

fn on_follows_from(&self, _span: &Id, _follows: &Id, _ctx: Context<'_, S>)

Notifies this layer that a span with the ID span recorded that it follows from the span with the ID follows.
§

fn event_enabled(&self, _event: &Event<'_>, _ctx: Context<'_, S>) -> bool

Called before on_event, to determine if on_event should be called. Read more
§

fn on_event(&self, _event: &Event<'_>, _ctx: Context<'_, S>)

Notifies this layer that an event has occurred.
§

fn on_enter(&self, _id: &Id, _ctx: Context<'_, S>)

Notifies this layer that a span with the given ID was entered.
§

fn on_exit(&self, _id: &Id, _ctx: Context<'_, S>)

Notifies this layer that the span with the given ID was exited.
§

fn on_close(&self, _id: Id, _ctx: Context<'_, S>)

Notifies this layer that the span with the given ID has been closed.
§

fn on_id_change(&self, _old: &Id, _new: &Id, _ctx: Context<'_, S>)

Notifies this layer that a span ID has been cloned, and that the subscriber returned a different ID.
§

fn and_then<L>(self, layer: L) -> Layered<L, Self, S>
where L: Layer<S>, Self: Sized,

Composes this layer around the given Layer, returning a Layered struct implementing Layer. Read more
§

fn with_subscriber(self, inner: S) -> Layered<Self, S>
where Self: Sized,

Composes this Layer with the given Subscriber, returning a Layered struct that implements Subscriber. Read more
§

fn with_filter<F>(self, filter: F) -> Filtered<Self, F, S>
where Self: Sized, F: Filter<S>,

Available on crate features registry and std only.
Combines self with a Filter, returning a Filtered layer. Read more
§

fn boxed(self) -> Box<dyn Layer<S> + Sync + Send>
where Self: Sized + Layer<S> + Send + Sync + 'static, S: Subscriber,

Available on crate features alloc or std only.
Erases the type of this Layer, returning a Boxed dyn Layer trait object. Read more
§

impl Ord for LevelFilter

§

fn cmp(&self, other: &LevelFilter) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
§

impl PartialEq<Level> for LevelFilter

§

fn eq(&self, other: &Level) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl PartialEq<LevelFilter> for Level

§

fn eq(&self, other: &LevelFilter) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl PartialEq for LevelFilter

§

fn eq(&self, other: &LevelFilter) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl PartialOrd<Level> for LevelFilter

§

fn partial_cmp(&self, other: &Level) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
§

fn lt(&self, other: &Level) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
§

fn le(&self, other: &Level) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
§

fn gt(&self, other: &Level) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
§

fn ge(&self, other: &Level) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
§

impl PartialOrd<LevelFilter> for Level

§

fn partial_cmp(&self, other: &LevelFilter) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
§

fn lt(&self, other: &LevelFilter) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
§

fn le(&self, other: &LevelFilter) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
§

fn gt(&self, other: &LevelFilter) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
§

fn ge(&self, other: &LevelFilter) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
§

impl PartialOrd for LevelFilter

§

fn partial_cmp(&self, other: &LevelFilter) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
§

fn lt(&self, other: &LevelFilter) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
§

fn le(&self, other: &LevelFilter) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
§

fn gt(&self, other: &LevelFilter) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
§

fn ge(&self, other: &LevelFilter) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
§

impl Copy for LevelFilter

§

impl Eq for LevelFilter

§

impl StructuralPartialEq for LevelFilter

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T, U> AsBindGroupShaderType<U> for T
where U: ShaderType, &'a T: for<'a> Into<U>,

§

fn as_bind_group_shader_type(&self, _images: &RenderAssets<GpuImage>) -> U

Return the T ShaderType for self. When used in AsBindGroup derives, it is safe to assume that all images in self exist.
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Copy,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<Q, K> Comparable<K> for Q
where Q: Ord + ?Sized, K: Borrow<Q> + ?Sized,

§

fn compare(&self, key: &K) -> Ordering

Compare self to key and return their ordering.
§

impl<T> Downcast<T> for T

§

fn downcast(&self) -> &T

§

impl<T> Downcast for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Sync + Send>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
§

impl<T> DynEq for T
where T: Any + Eq,

§

fn as_any(&self) -> &(dyn Any + 'static)

Casts the type to dyn Any.
§

fn dyn_eq(&self, other: &(dyn DynEq + 'static)) -> bool

This method tests for self and other values to be equal. Read more
§

impl<T> DynHash for T
where T: DynEq + Hash,

§

fn as_dyn_eq(&self) -> &(dyn DynEq + 'static)

Casts the type to dyn Any.
§

fn dyn_hash(&self, state: &mut dyn Hasher)

Feeds this value into the given Hasher.
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<F, S> FilterExt<S> for F
where F: Filter<S>,

§

fn and<B>(self, other: B) -> And<Self, B, S>
where Self: Sized, B: Filter<S>,

Combines this Filter with another Filter s so that spans and events are enabled if and only if both filters return true. Read more
§

fn or<B>(self, other: B) -> Or<Self, B, S>
where Self: Sized, B: Filter<S>,

Combines two Filters so that spans and events are enabled if either filter returns true. Read more
§

fn not(self) -> Not<Self, S>
where Self: Sized,

Inverts self, returning a filter that enables spans and events only if self would not enable them. Read more
§

fn boxed(self) -> Box<dyn Filter<S> + Sync + Send>
where Self: Sized + Send + Sync + 'static,

Boxes self, erasing its concrete type. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<S> FromSample<S> for S

§

fn from_sample_(s: S) -> S

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<F, T> IntoSample<T> for F
where T: FromSample<F>,

§

fn into_sample(self) -> T

§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T, U> ToSample<U> for T
where U: FromSample<T>,

§

fn to_sample_(self) -> U

§

impl<T> ToSmolStr for T
where T: Display + ?Sized,

§

fn to_smolstr(&self) -> SmolStr

source§

impl<T> ToString for T
where T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T> TypeData for T
where T: 'static + Send + Sync + Clone,

§

fn clone_type_data(&self) -> Box<dyn TypeData>

§

impl<T> Upcast<T> for T

§

fn upcast(&self) -> Option<&T>

§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more
§

impl<T> ConditionalSend for T
where T: Send,

§

impl<S, T> Duplex<S> for T
where T: FromSample<S> + ToSample<S>,

source§

impl<N> NodeTrait for N
where N: Copy + Ord + Hash,

§

impl<T> Settings for T
where T: 'static + Send + Sync,

§

impl<T> WasmNotSend for T
where T: Send,

§

impl<T> WasmNotSendSync for T
where T: WasmNotSend + WasmNotSync,

§

impl<T> WasmNotSync for T
where T: Sync,